WHAT’S INCLUDED
To view HOW-TO VIDEOS
scan QR Code.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet
only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT
attempt to defeat this safety feature. It is not recommended to use an extension cord with this product.
WARNING
To reduce the risk of fire, electric
shock, or injury:
GENERAL WARNINGS: WHEN USING YOUR SHARK® STEAM PICKUP,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
1.
WARNING: Danger of Scalding. The steam emitted from the Steam
Pickup is very hot and may cause scalding. Please use caution
when using the Steam Pickup.
2. DO NOT leave the Steam Pickup unattended when plugged in.
ALWAYS unplug the power cord from the electrical outlet when
not in use and before servicing.
3. DO NOT use with damaged cord or plug. If Steam Pickup is
not working as it should or has been dropped, damaged, left
outdoors, or dropped into water, return it to SharkNinja Operating
LLC for examination and repair. Incorrect reassembly or repair can
cause a risk of electrical shock or injury when used.
4. To protect against a risk of electric shock, DO NOT immerse the
Steam Pickup in water or any other liquids.
5. DO NOT handle the plug or Steam Pickup with wet hands or
operate it without wearing shoes.
6. DO NOT pull or carry by cord, use cord as a handle, close a door on
cord, or pull cord around sharp edges or corners.
7. DO NOT run Steam Pickup over cord. Keep cord away from heated
surfaces.
8. Unplug before servicing.
9. ALWAYS make sure the Steam Pickup is UNPLUGGED when not
in use.
10. NEVER fill the Steam Pickup or attach the mop head when the
Steam Pickup is plugged into an electrical outlet. Unplug from the
electrical outlet and allow to cool before you fill the mop, or attach
or remove the head.
11. When cleaning the exterior of the Steam Pickup, unplug the
power cord from the electrical outlet and clean the Steam Pickup
with a dry or damp cloth. DO NOT pour water or use alcohol,
benzene, or paint thinner on the Steam Pickup.
12. To avoid circuit overload, DO NOT operate another appliance on
the same socket (circuit).
13. To avoid scalding injuries, ALWAYS unplug and allow the Steam
Pickup to cool before removing tanks/brushroll.
USE WARNINGS
14. When in use, NEVER turn the Steam Pickup on its side.
15. Use the system only for its intended use.
16. DO NOT use for space-heating purposes.
17. DO NOT use outdoors.
18. DO NOT allow the Steam Pickup to be used by children. Close
attention is necessary when used near children, pets, or plants.
19. Use only as described in this Owner’s Guide.
20. Use only manufacturer’s recommended accessories.
21. DO NOT put any objects into the steam nozzle openings.
22. DO NOT put hands or feet under the steam. It gets very hot.
23. Use ONLY on flat, horizontal surfaces. DO NOT use on walls,
counters, or windows.
24. DO NOT use on leather, wax-polished furniture, synthetic fabrics,
velvet, or other delicate, steam-sensitive materials.
25. DO NOT add cleaning solutions, scented perfumes, oils, or any
other chemicals to the water used in the Steam Pickup as this may
damage it or make it unsafe for use. If you live in a hard-water
area, we recommend using distilled water in your Steam Pickup.
26. You can release the brushroll after you have unplugged the Steam
Pickup and allowed it to cool.
27. Extreme caution should be exercised when using the Steam
Pickup to clean stairs.
28. NEVER use Steam Pickup without the brushroll or debris tank
attached.
29. Keep your work area well lit.
30. Store Steam Pickup indoors in a cool, dry place.
31. Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.
32. DO NOT carry the Steam Pickup while in use.
33. The steam emitted from the Steam Pickup is very hot and may
cause scalding. Please use caution when using the Steam Pickup.
34. DO NOT use on unsealed wood or unglazed ceramic floors. On
surfaces that have been treated with wax and on some unwaxed
floors, the sheen may be removed by the heat and steam action.
35. ALWAYS test an isolated area of the surface to be cleaned before
proceeding. We also recommend that you check the use and care
instructions from the floor manufacturer.
36. DO NOT scrub any one area for an extended period.
37. DO NOT use the Steam Pickup without the brushroll and adding
water to the water tank. When you use the Steam Pickup for the
first time, it might take longer than the normal seconds to start
steaming.
38. To prolong the life of your Steam Pickup, we recommend using
distilled water. Add ONLY water to the tank. Chemicals or cleaning
solutions (including vinegar) may damage the Steam Pickup and
could be unsafe for you and your family.
39. The liquid or steam must not be directed towards equipment
containing electrical components, such as the interior of ovens.
container. Dispose of contents/container with a licensed waste
disposal site in accordance with the requirements of the local
waste disposal authority.
40. DO NOT use to pick up flammable or combustible liquids, such as
gasoline, or use in areas where they may be present.
41. Use only identical replacement parts. Only use parts designated
for this product.
42. DO NOT allow to be used as a toy.
43. Keep Steam Pickup away from children.
44. Keep the appliance out of reach of children when it is energized
or cooling down.
IMPORTANT SAFETY INSTRUCTIONS – FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS.
READ ALL INSTRUCTIONS BEFORE USING THIS CLEANER.
ASSEMBLY STEAM MODES
D
B
G
H
I
A
C
E
F
Note: The unit will not produce steam until it is powered on and the handle is tilted down.
Note: To detach the handle, press the release button on the back of the unit and lift
off the handle.
Note: Not all accessories come with all units and may vary by
model. Please visit www.sharkclean.com for more details.
PRODUCT USE: (REFER TO NEXT PAGE)
1. Align the Pole with the
opening in the Main Body
and insert firmly until it
clicks into place.
2. Place the Steam Pickup on
the floor near a wall outlet
and plug in the cord. The
LEDs on the main body will
illuminate when plugged in.
3. Make sure all parts are
securely clicked into place.
STEAM LEVEL
The Shark Steam Pickup has 2 unique Steam Control settings so that you can select the ideal amount of
steam to use for each cleaning task. Use NORMAL mode for everyday basic cleaning, ideal for large and
moderately dirty areas. Use LIGHT mode for less steam, idea for delicate surfaces and a light clean. Press
the Mode Select button to select the steam level and wait 20 seconds for steam to generate.
SETTING
RECOMMENDED USAGE
NORMAL
Basic, everyday cleaning.
Cleaning large areas.
Cleaning moderate and
heavy-trac areas.
LIGHT
Cleaning delicate surfaces
Light cleaning and dusting
Loosening and lifting light dirt
STANDBY
Once plugged in, the
Steam Pickup will be in Standby
mode and all 2 steam level lights
will blink. Press the Mode Button
to select Light or Normal level,
then wait 20 seconds to allow
steam to release.
A
Handle
B
Pole
C
Power Cord
D
Mode Select Button
E
Wand Release Button
F
Clean Water Tank
G
Debris Tank
H
Nozzle Cover
I
Brushroll
J
Storage Dock
K
Brushroll Cleaning Tool
J
K
1 2 3
SD200
Steam Pickup
To Next Page
Need help?
General
