WARNING
To reduce the risk of injury, fire, electric shock, and property damage
resulting from improper use of the appliance, carefully observe the
following instructions. This unit contains electrical connections and
moving parts that potentially present risk to the user.
POWER SUPPLY, CHARGING DOCK, AND VACUUM CONTAIN
ELECTRICAL CONNECTIONS:
1. There are NO serviceable parts.
2. DO NOT use to vacuum any liquids.
3. DO NOT immerse in water or other liquids.
4. If vacuum is damaged, discontinue use.
5.
To avoid fire, explosion, or injury, inspect vacuum and charging dock for any damage before use.
DO NOT
use damaged vacuum or charging dock.
6.
DO NOT
use outdoors or on wet surfaces. Use only on dry surfaces.
7.
If vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or immersed in
water, return it to SharkNinja Operating LLC for examination, repair, or adjustment.
8. DO NOT
handle charger or vacuum cleaner with wet hands.
9. DO NOT
leave vacuum cleaner unattended while powered on.
10.
Keep vacuum away from heated surfaces.
11.
Always turn o vacuum before connecting charging dock.
12.
Use only Shark® chargers and batteries. Other types of batteries may burst, causing injury and damage.
13.
Use charging dock on flat and stable surfaces only.
14. DO NOT
incinerate appliance, even if it is severely damaged, as lithium-ion battery may explode in a fire.
GENERAL USE
15. DO NOT
carry the charger by the cord or yank to disconnect from an outlet; instead grasp the plug and pull
to disconnect.
16.
Keep charger cord away from heated surfaces.
17.
Use only as described in this manual.
18.
Keep your work area well lit.
19.
To avoid unintentional starting, always turn o the vacuum cleaner before picking it up or carrying it, and
before attaching or detaching the charger, dust cup, filter, or any accessories.
20.
DO NOT
put any objects into openings.
21. DO NOT
use if any opening is blocked; keep free of dust, lint, hair, or anything that may reduce airflow.
22.
This vacuum is not a toy, and must not be played with. Children over 8 years old and persons with reduced
physical, sensory, or mental capabilities may only use the vacuum with supervision or prior safety instruction and
an understanding of the hazards involved. Children may not clean or maintain the vacuum without supervision.
23. DO NOT
use without dust cup and filter in place.
24. DO NOT
use if airflow is restricted; if the air paths become blocked, turn o the vacuum cleaner. Clear all
obstructions and power on again.
25.
Keep nozzle away from hair, face, fingers, uncovered feet, or loose clothing.
26.
Only use manufacturer’s recommended attachments.
27. DO NOT
charge at temperatures below 50°F (10°C) or above 104°F (40°C). Charging improperly or at
temperatures outside of the specified range may damage the battery and increase the risk of fire.
28.
Store the appliance indoors.
DO NOT
use or store it below 37.4°F (3°C). Ensure the appliance is at room
temperature before operating.
DUST CUP/FILTERS/ACCESSORIES
Before turning on the vacuum:
29.
Make sure filter is thoroughly dry after routine cleaning.
30.
Make sure dust cup and filter are in place after routine maintenance.
31.
Make sure accessories are free of blockages and keep openings away from face and body.
32.
Use only Shark® brand filters and accessories. Using other brands will void warranty.
GENERAL CLEANING
33.
DO NOT vacuum up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.
34.
DO NOT vacuum up drywall dust, fireplace ash, or embers.
35.
DO NOT use as an attachment to power tools for dust collection.
36.
DO NOT vacuum up smoking or burning objects such as hot coals, cigarette butts, or matches.
37.
DO NOT vacuum up flammable or combustible materials (e.g., lighter fluid, gasoline, or kerosene) or use
vacuum in areas where they may be present.
38.
DO NOT vacuum up toxic solutions (e.g., chlorine bleach, ammonia, or drain cleaner).
39.
DO NOT use in an enclosed space where vapors are present from paint, paint thinner, moth-proofing
substances, flammable dust, or other explosive or toxic materials.
40.
DO NOT immerse vacuum cleaner in water or other liquids.
41.
Use extra care when cleaning on stairs.
LITHIUM-ION BATTERY
42.
The battery is the power source for the appliance. DO NOT carry the appliance with your finger on the power
button. DO NOT charge appliance with the power on.
43.
Use only the included charging dock to charge. Use of incorrect charger may create a risk of fire.
44.
Use appliance only with included lithium-ion battery. Use of any other battery may create a risk of injury and fire.
45.
Under abusive conditions, liquid may be ejected from the battery. Avoid contact with liquid, as it may cause
irritation or burns. If contact occurs, flush with water. If liquid contacts eyes, seek medical help.
46.
Store the appliance indoors. To maintain battery life, DO NOT use or store battery at temperatures below
37.4°F (3°C) or above 104°F (40°C).
47.
DO NOT expose appliance to fire or temperature above 266°F (130°C) as it may cause explosion.
48.
There are NO serviceable parts. To ensure safety, DO NOT modify or attempt to repair the appliance.
IMPORTANT SAFETY INSTRUCTIONS – FOR HOUSEHOLD USE ONLY
READ CAREFULLY BEFORE USE – SAVE THESE INSTRUCTIONS
WHAT'S INSIDE USING YOUR SHARK WANDVAC™
NOTE: For maintenance, see reverse side.
CHARGING THE BATTERY
Prior to first use,
the lithium-ion battery
must be charged
completely, even if
it comes with a
partial charge.
Place the Shark®
WANDVAC™ onto the
WANDVAC Charging
Dock with the nozzle in
the cradle.
Plug the charging dock
into a wall outlet.
Solid blue
In Use
Dim
Charged
Fades in
and out
Charging
Blinking
Low Battery
NOTE: During first use, run the battery all the way down to properly
condition it, then charge fully. It takes approximately 2.5 hours to
charge battery completely.
4
1 2
3
1. Press Power button.
2. Run the nozzle over the surface to be cleaned.
3. To empty dust cup, hold your WANDVAC over the trash.
4. Slide dust cup button forward to release debris.
CORD-FREE HANDHELD VACUUM
WANDVAC
™
WV200C
F
4
A
Shark® WANDVAC™
B
Crevice Tool
C
Multi-Surface Pet Tool
D
WANDVAC Charging Stand
E
WANDVAC Charging Base
F
Onboard Accessory
Storage (double pocket)
C
2 3
A
D
E
B
1. Align the holes in the bottom of
the WANDVAC Charging Stand
with the posts on the front of the
Charging Base. Run the Charger
Cord between the posts.
2. With the cord in place, slide the
stand down until it clicks securely
into place on the base.
3. Route the cord
through the groove
in the bottom of the
base and out the
indent in the back.
4. Insert the Accessory
Storage Tray into the
opening behind the
charging stand.
WANDVAC CHARGING STAND ASSEMBLY
1
>Click<
To Next Page
Need help?
General
