Sharp 13N-M100 - Language; Setting On-Screen Display Language; Sleep Timer; Setting the Sleep Timer

10
SL EP T IMER
SET UP
E
VIDEO ADJUST
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EP T IMER
SET UP
E
VIDEO ADJUST
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EP T IMER
SET UP
E
VIDEO ADJUST
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
FR NCAIS
ENGL I SH
ESPAÑOL
LANGUAGE
A
FR NCAIS
ENGL I SH
ESPAÑOL
IDIOMA
A
SL EP T IMERE
120 RE AIMN
BL E SCREENU
LANGUAGE
INGCH SETT
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to “SET UP”.
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP ( 8 )
or
DOWN ( 9 ) to move the “ ” mark to “LANGUAGE”.
4 Press VOL (+) or (–) to access LANGUAGE change mode.
5 Press CH UP ( 8 ) or DOWN ( 9 ) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
6 Press MENU to exit.
Sleep Timer
L You can set the number of minutes for your TV to automatically turn off.
1 Press MENU to access MAIN MENU screen.
2 Press VOL (+) or (–) to access TIMER SET mode.
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
Note:
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during
step 3.
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remote’s Display key is pressed.
(MAIN MENU screen)
(TIMER SET mode)
(LANGUAGE change mode)
(MAIN MENU screen)
→
→
Language
(SET UP mode)
→
10-11 13N-M100/150[B].p65e 31/07/2000, 11:51 PM10