Sharp 13N-M100 - Set Up (Continued); Manual Channel Setting; Air;Cable Mode Selection

22
LA
BL E NSCREE
NGUAGE
U
CH SETT I NG
AI
ABLE STD
R
AI /CABLER
C
ABLE HRCC
ABLE IRCC
→
→
AIR
CABLE STD
CABLE HRC CABLE IRC
H SEARCH
EZ SETUP
AI /CABLER
C
H MEMORYC
SL EP TIMER
SET UP
E
VIDEO ADJUST
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
H SEARCH
EZ SETUP
AI /CABLER
C
H MEMORYC
→
Set Up (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to “SET
UP”.
3 Press VOL (+) or (–) to access SET UP mode.
4 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to “CH
SETTING”.
5 Press VOL (+) or (–) to access CH SETTING mode.
6 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to “AIR/
CABLE”, then press
VOL (+) or (–) to access AIR/CABLE mode.
7 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to the
desired mode.
8 Press MENU to exit.
Note:
• Receivable channels of your TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
(CH SETTING mode)
(MAIN MENU screen)
(SET UP mode)
(AIR/CABLE mode)
20-22 13N-M100/150[B].p65e 31/07/2000, 11:52 PM22