6
20N-S100S
CN20S10
LOCATION OF USER'S CONTROL
–
VOL
+
POWER
M
T
S
S
T
E
R
E
O
V
ID
E
O
I
N
L
-
A
U
D
I
O
-
R
CH
–
V
OL
+
POWER
M
E
N
U
CH
M
E
N
U
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
VCR
MENU MUTE
CATV
PAUSE
TV
FLASHBACK
A
DISPLAY
INPUT
B C D
TV • VCR • CATV
STOP REC
REW PLAY FF
VCR CH
ENTER
PERSONAL PREFERENCE
VOL
—
CH
CH
VOL
+
Front Panel
VIDEO/AUDIO
TERMINALS
(VIDEO/AUDIO terminals are
also provided on the rear.)
CHANNEL UP/DOWN – MENU
( ) Selects next higher channel.
( ) Selects next lower channel.
• Press both at the same time to
access the MAIN MENU screen.
Basic Remote Control Functions
IN
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV.
In CATV position, sends power and
channel select commands to a cable
TV converter.
VCR CONTROL
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press → Switch to external video
INPUT mode.
Press again → Switch to TV mode.
ENTER
Used in some instances where a VCR
or Cable Converter Box requires an
“enter” command after selecting
channels, when using the REMOTE
KEYPAD button.
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
• Moves the “
” mark of the MENU
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
POWER
Press → On.
Press again → Off.
SENSOR AREA FOR
REMOTE CONTROL
'
"
'
"
To Next Page
Loading...
Need help?
General