Sharp 21V-FW100S - Page 28

21V-FW100S
5 – 17
ADJUSTMENT
ITEM
ADJUSTMENT
POSITION
CONTOROL
PRE-ADJUST
REQUIREMENT
CONTENT
INPUT
CONDITION
OUTPUT
ADJUSTMENT
PROCEDURE
MODEL
21V-FW100S
SYMBOL
MODEL NAME
HIGH VOLTAGE
ˉ
STEP RANGE
ˉ
21V-FW100S
ˉ
AFTER ALL ADJUSTMENT FINISHED.
US 4 CH LION HEAD (MONOSCOPE PATTERN)
AC 220V, RF INPUT
USE ELECTROSTATIC HI-VOLTAGE METER AND FOLLOW THE UL / DHHS STANDARD TO MAKE
CORRECTION AND CONTROL.
CRT ANODE VOLTAGE
[CAUTION POINT ]
SET THE USER CONTROL TO SHIPMENT SETTING POSITION.PUSH ON Y - MUTE BY R/C
CONFIRM THE VOLTAGE OF CRT ANODE BY HIGH VOLTAGE METER AND MAKE SURE T HE
READINGISASBELOW.
HIGH VOLTAGE
BELOW 30kV
HISTORY
OF REVISION
REVISED CONTENT .