Sharp 27SF560 - Page 27

27
Dimension: 140 X 215 mm
•
Activating the V-CHIP BLOCK
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/s to move the “E” mark to “STATUS”. Press VOL k/
l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP
BLOCK will not operate.)
3 Press MENU, then “INPUT SECRET No.” will be displayed.
Note:
• If SECRET No. is already set, skip to step 5.
4 Enter a 4-digit secret No. using the REMOTE KEYPAD.
5 Press MENU and the secret No. will be registered.
•
To temporarily cancel the V-CHIP BLOCK
1 “V-CHIP HAS BEEN ACTIVATED” appears if you view a program
with the same program rating data you configured.
Note:
•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is
not configured to “ON”.
2 Press MENU, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit secret No. using the REMOTE
KEYPAD, then V-CHIP BLOCK will be canceled
temporarily. If the wrong secret No. is chosen,
“SECRET No. IS INCORRECT” will be displayed.
Input the secret No. again in this case.
Note:
• If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again.
Parent Control (V-CHIP Operation) (Continued)
321
654
987
0
ENTER
22
V–CH I P
TV–Y7
FV
HAS BEEN ACT I VATED
I NPUT
––––
SECRET No .
I NPUT SECRET No .
→
VOL
—
VOL
+
CH
CH
MPAA
TV GU I
Cdn .
nEglis Rhatinsg
Cdn .
rFenchRatinsg
EDLINES
STATU
S:O
N
(V-CHIP select screen)
I NPUT
––––
SECRET No .
I NPUT
1234
SECRET No .
321
654
987
0
ENTER
27SF560(26-28).p65 26/10/05, 5:40 PM27