Sharp 27SF560

34
Dimension: 140 X 215 mm
7 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
H Channel Setting
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the “E” mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen.
4 Press CH a/s to move the “E” mark to “CH SETTING”.
5 Press VOL k/l to access the CH SETTING screen.
Note:
• If the viewing channel is an analog channel, Antenna
Setup Digital cannot be selected.
• During Cable mode, Digital Channel Search and
Antenna Setup Digital cannot be selected.
6 Press CH a/s to move the “E” mark to “AIR/ANALOG CABLE”,
then press VOL k/l to access the AIR/CABLE screen.
7 Press CH a/s to move the “E” mark to the desired mode.
8 Press MENU to exit.
Note:
• Receivable channels of your TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
Set Up (Continued)
(MAIN MENU screen)
(CH SETTING screen)
(SET UP screen)
(AIR/CABLE screen)
→
→
→
BLUE SCREEN
PERSONAL PREF.
UN IVERSAL
LANGUAGE
CH SETT I NG
CH / INPUT I D
AUTO INPUT
SCREEN FORMAT
PLUS
SET
UP
AIR/
CH SEARCH
CH SEARCH
CH MEMORY
EZ SETUP
CH SETT I NG
ANALOG
ANALOG
ANTENNA SETUP
CABLE
DIGI TAL
DIGI TAL
CABLE
CABLE HRC
CABLE I RC
AIR
STD
A I R/ ANALOG CABLE
AIR
CABLE STD CABLE HRC CABLE IRC
SLEEP T IMER
AUDI O SEL ECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
VIDEO ADJUST
MENU
DIGITAL
AUD I O
CC
ES
VOL
—
VOL
+
CH
CH
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
CH
CH
CH
CH
2
AIR/
CH SEARCH
CH SEARCH
CH MEMORY
EZ SETUP
CH SETT I NG
ANALOG
ANALOG
ANTENNA SETUP
CABLE
DIGITAL
DIGITAL
27SF560(33-34).p65 26/10/05, 5:43 PM34