Sharp 27SF560

42
Dimension: 140 X 215 mm
CH/Input ID (Continued)
5 Use CH a/s or REMOTE KEYPAD to select each desired channel
to label.
Press INPUT on the Remote to label the INPUT mode.
ID: Labeling the channel name
Press VOL k/l to select “ID” then press VOL k to select the
first character. Press CH a/s to enter a desired letter. Press
VOL k/l to enter the next desired letter. Press MENU to return
to the CH/INPUT ID screen.
Selectable characters:
Space: _
Alphabets: A-Z
Numbers: 0-9
Symbols: — . & ( ) / +
RESET: Resetting the ID to “_ _ _ _”
Press CH a/s to move the “E” mark to “RESET”, then press
VOL k/l. The previously set ID will return to “_ _ _ _”.
6 Press MENU to exit.
Note:
• The maximum number of ID labels available to register Analog channel names is 20 for AIR channels
and 40 for CABLE channels.
• If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID
to make room.
CH
CH
VOL
—
VOL
+
ID
RESET
: TV 1 2
MENU : RETURN
ID
RESET
: _ _ __
MENU
: RETURN
CH
CH
→
VOL
—
VOL
+
→
321
654
987
0
ENTER
VOL
—
VOL
+
ID
RESET
: _ _ __
MENU
: RETURN
ID
RESET
: TV 1 2
MENU : RETURN
or
CH
CH
VOL
+
→
(ID Input screen)
Example TV 12
27SF560(40-42).p65 26/10/05, 5:45 PM42