Sharp 2T-C45AE1X - Settings and Factory Configuration; Headphone Volume Setting; Factory Setting Procedure

2T-C45AE1X
5 – 7
2. HEADPHONE VOLUME SETTING
Set TV Volume to 50 at the checker process by using RS-232 communication(K-Mode).
3. FACTORY SETTING
AC power is plug off after shipment setting is done.
Caution: Do not plug on again after shipment setting is done. If do, please re-do the shipment setting. Do
not off with remote control.
Model Name Factory Setting
Key Name
Remote Control
Code
S-System
Setting
OSD Language
Setting
A3KLLAE1SZ/J/I/Y/P/B /M/N
GENERAL 10000 0111 0111 10 MULTI 13 LANGUAGES
ITEM CONDITION PROCEDURE
Factory setting AC power off to exit
the factory setting.
1. Setting is done with test remote control.
2.PresstheʻFactorySettingʼkeyontheremotecontrolcontinuously.
3.WhenGreenbackgroundappearsonscreenandʻKʼmark
disappears, setting is completed.
The followings are initialised to factory setting:
1) User setting
2) Channel data (e.g. broadcast frequencies)
3)  Manufacturerʼsoptionsettings
4) Password data
5) Setting values are set based on model destination