Sharp 32SF56B User Manual

Front Panel
VOLUME UP/DOWN
( ) Increases sound.
( ) Decreases sound.
VIDEO/AUDIO
TERMINALS
IN 2
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
POWER
Press
→ On.
Press again
→ Off.
MENU
Press
→ Accesses MAIN MENU.
Press again
→ Exits MAIN MENU.
REMOTE CONTROL
SENSOR
'
"
INSIDE DOOR
+
LOCATION OF USER'S CONTROL(32SF56B)
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from
their actual appearance.
1 2 3
4 5 6
7 8 9
0
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY INPUT
TV CATV VCR DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
ó
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD
VCR
POWER
Press
On.
Press again
Off.
REMOTE KEYPAD (0 – 9)
Sets the channel.
FLASHBACK
Returns to previous channel.
•
(DOT)
Sets the channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press
Accesses MAIN MENU.
Press again
Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will
be for TV and VCR control.
In CATV/DVD position, signals sent
will be for cable TV converter and
DVD control.
DVD/VCR CONTROL
Infrared Transmitter Window
DISPLAY
Press
Displays receiving channel
for 4 seconds.
Press again
Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press
Switches to external video
INPUT 1 mode.
Press twice
Switches to external
video INPUT 2 mode.
Press 3 times
Switches to external
video INPUT 3 mode or
COMPONENT mode.
Press 4 times
Switches back to
the original TV mode.
ENTER
• Used to confirm the channel
selection and Personal Preference
channel.
• Used in some instances where a
Cable Converter Box requires an
“enter” command after selecting
channels, when using the REMOTE
KEYPAD button.
CHANNEL UP/DOWN
() Selects next higher channel.
() Selects next lower channel.
• Moves the “ ” mark on the MENU
screens.
MUTE
Press
Mutes sound.
Press again
Restores sound.
Basic Remote Control Functions
32SF56B
4

Sharp 32SF56B Specifications

General

Brand	Sharp
Model	32SF56B
Category	TV
Language	English