Sharp 770SH - Page 126

Settings 125
Shortcuts
You can change the default shortcut action/assignment
of the a , b , c, d, A and C soft keys and the U
key itself with the Shortcuts menu.
The menu shows the current assignment of each of the
above keys.
“Settings”
→ “Phone Settings” → “Shortcuts”
1. Highlight the key you wish to change.
2. Press [Assign].
3. Press a and b to scroll by item.
Press c and d to scroll by group.
4. Press [Select] to update the key for the highlighted
item.
Note
• If you are outside of your network area, the network-
related items are not available.
Tip
• You can clear the settings by selecting “Set to
Default” in step 1.
Locks
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is registered on the SIM card and you should have
been made aware of the code when you purchased the
SIM card. Contact your service provider for further
details.
“Settings”
→ “Phone Settings” → “Locks” → “PIN
Entry”
→ “Switch On/Off”
1. Select “On” to enable the PIN code or “Off” to
disable.
2. Enter your PIN code.
Note
• If you enter the wrong PIN code three times in step 2,
the SIM card will lock. To remove the lock, contact
your service provider/SIM card vendor.
(M 12-6) (M 12-7)
(M 12-7-1)