Sharp 770SH - Page 139

138 Settings
Rejecting a Call when the Caller’s Number is
Withheld
“Settings”
→ “Call Settings” → “Restrict Calls” →
“Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings”
→ “Call Settings” → “Restrict Calls” →
“Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to
enter the password again.
4. Press B.
Fixed Dialling Number
When the Fixed Dialling Number is enabled, you can
only call pre-registered numbers.
Note
• This service depends on the SIM card.
To Enable Fixed Dialling Number
“Settings”
→ “Call Settings” → “Restrict Calls” →
“Fixed Dialling Number”
1. Enter your PIN2 code.
2. Select “Switch On/Off”.
3. Select “On” to enable this function.
To Add a New Name
“Settings”
→ “Call Settings” → “Restrict Calls” →
“Fixed Dialling Number”
1. Enter your PIN2 code.
2. Select “Edit Dial List”.
3. Highlight a blank entry, press [Options], then select
“Add New Dial”.
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Add New Contact” on page 38.
5. Press [Save].