Sharp 8M-B120C Quick Start Guide

8M-B120C Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove battery (section 4)
2. Remove Back covers (section 5)
3. Remove Printed circuit boards (section 6)
4. Dismantle LCD (section 7)
5. Remove Electrolyte Capacitors (section 8)

Sharp 8M-B120C Specifications

General

Brand	Sharp
Model	8M-B120C
Category	Monitor
Language	English