Sharp AE-X18ZU - Timer Operation Settings; Setting Off and On Timers

EN-20
TIMER OPERATION
TIPS ABOUT OFF TIMER OPERATION
When the OFF TIMER mode is set, the
temperature setting is automatically adjusted to
prevent the room from be coming excessively
warm or cool, for example while you sleep. (Auto
Sleep function)
COOL MODE:
 
temperature setting rises 1°C higher than the
original temperature setting
.
HEAT MODE:
 

original temperature setting.
3
2
1
ON TIMER
1
Press the ON TIMER ( )
button.
2
The ON TIMER indicator " " will
blink; press the TIME ADVANCE (
) or REVERSE ( ) button to set the
desired time.
(The time can be set in 10-minute
increments or decrements.)
3
Select the operation condition.
4
Press the TIMER SET (SET/C) button.
  ) on the
unit will light.
NOTE:
 
to allow the room to reach the desired
temperature by the programmed time.
(Awaking function)
1
4
2
Before setting the timer, make sure the clock is properly set with the current time.
OFF TIMER
1
Press the OFF TIMER ( )
button.
2
The OFF TIMER indicator "
" will blink; press the TIME
ADVANCE (
) or REVERSE (
) button to set the desired time.
(The time can be set in 10-minute
increments.)
3
Press the TIMER SET (SET/C)
button.
indicator ( ) on the
unit will light up.
OM-B142 ZU A5 EN.indd 20 2022/7/22 10:59:24