Sharp AE-X26FR-N - Page 49

AYXP26FRN
5 – 8
– Disassembly of Heater(CHET-A025JBKZ) Unit
1) Cut the band fixing the bi-metal thermostat.
2) Powercord for bi-metal thermostat.
3) Cut the band which holds together the thermistor cords and
power cord for bi-metal thermostat.
4) Remove screw NK-8K
5) Purr out the heater wire from beneath the heat exchanger
1)
2)
4)
5)