To Next PageTo Next PageWhy won't my Sharp AH-A9LCA turn on immediately after restarting?
If your Sharp Air Conditioner does not operate immediately after being restarted, it is because the unit is designed to protect itself. It will not operate for approximately 3 minutes after being stopped. Please wait until this period has elapsed.
Why does my Sharp Air Conditioner emit mist in cooling mode?
The mist emitted from the Sharp Air Conditioner's air outlet vent in Cooling mode is usually observed when the indoor temperature and humidity are very high. This occurs because the room air is rapidly cooled down. As the air conditioner runs and the indoor temperature and humidity decrease, the mist will disappear.
Why does my Sharp AH-A9LCA Air Conditioner smell when I turn it on?
If there is an unusual smell coming from your Sharp Air Conditioner after you turn it on, it's likely due to odors accumulated in the surrounding environment, as the unit itself doesn't produce a peculiar smell. Cleaning the filter might help. If the smell persists, you may need to clean the air conditioner and should contact a SHARP authorized service center.
What is the water flowing sound in my Sharp Air Conditioner?
The sound of water flow you hear during operation of your Sharp Air Conditioner is the sound of refrigerant flowing, especially when the air conditioner starts, when the compressor starts or stops, or when the unit stops. This swooshing or gurgling sound is normal.
What causes the creaking noise in my Sharp AH-A9LCA Air Conditioner?
The creaking noise you hear when starting or stopping your Sharp Air Conditioner is due to the plastic components deforming as the temperature changes.
General| Type | Split System |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 798 x 293 x 230 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 269 mm |
| Weight (Indoor Unit) | 9 kg |
| Indoor Unit Weight | 9 kg |
| Weight (Outdoor Unit) | 26 kg |
| Outdoor Unit Weight | 26 kg |
| Noise Level (Indoor) | 37 dB |
| Heating Capacity | 2.8 kW |
| Power Consumption (Cooling) | 800 W |
Essential safety and operational advice regarding grounding and power disconnection.
Instructions on maintaining clear air intake and outlet vents for optimal performance.
Critical warnings against unauthorized repairs and specific items to keep away.
Guidance on power cord safety and adjusting vertical airflow direction.
Warnings against inserting objects and directing airflow towards sensitive targets.
Limitations on unit usage and safety precautions against water contact.
Advice on positioning heaters away from the unit and general safety.
Explanation of how the air conditioner absorbs and transfers heat for cooling.
Description of the unit's protective function against frost formation.
Visual identification and labeling of key parts for both indoor and outdoor units.
Detailed functions of fundamental remote control buttons for operation and settings.
Operation of specific remote control functions like BLOW, TEMP adjustment, and TURBO mode.
How to set timer functions (ON/OFF) and adjust swing angles using the remote.
Overview of general, optional, and special functions like BLOW, AUTO, TURBO, and SLEEP.
Instructions for key lock, battery changes, and important operational notices.
Control of the indoor unit display light and operation via manual switch.
Safety warnings for maintenance and instructions for cleaning the front panel.
Step-by-step guide for removing, cleaning, and reinstalling air filters.
Essential checks before use and maintenance procedures after use.
Addresses issues like delayed start, unusual smells, water sounds, and mist.
Solutions for poor cooling, remote control unavailability, and water leakage.
Troubleshooting for no air delivery, moisture on vents, and critical safety actions.
Immediate steps to take in case of severe malfunctions or safety hazards.
Important notices, basic requirements, and selection criteria for indoor unit installation.
Guidelines for outdoor unit placement and essential electrical safety requirements.
Specific instructions and warnings regarding proper electrical earthing.
Visual guide detailing the necessary clearances and dimensions for unit installation.
Steps for mounting the rear panel and preparing the piping hole.
Instructions for installing the drainage pipe and connecting indoor/outdoor wires.
Detailed procedures for wiring, hanging the unit, and connecting pipes with torque specifications.
Guide for connecting the electrical wiring to the outdoor unit.
Procedures for air purging and performing leakage tests on the refrigerant system.
A checklist of items to verify after installation for proper functioning.
Steps to follow for performing the initial test operation of the air conditioner.
Steps for installing the Catechin filter onto the air filter or front case.
Guidance on cleaning, maintaining, and the expected lifespan of the Catechin filter.
