To Next PageTo Next Page
Need help?Do you have a question about the Sharp AH-AP9JHY and is the answer not in the manual?
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 50 dB |
| Air Flow (Indoor Unit) | 10.5 m³/min |
| Energy Efficiency Ratio (EER) | 3.21 W/W |
Specific safety warnings to follow during the operation of the air conditioner.
Precautions to take during operation to avoid damage or inconvenience.
Important considerations for selecting the proper location for unit installation.
Detailed labeling of the parts belonging to the indoor air conditioning unit.
Detailed labeling of the parts belonging to the outdoor air conditioning unit.
Explanation of the symbols and indicators shown on the remote's display screen.
Step-by-step guide on how to properly insert batteries into the remote control.
Procedure for setting the current time on the remote control for timer functions.
Basic instructions on pointing and operating the remote control towards the unit.
Details on operating the unit in AUTO and DRY modes, including temperature adjustments.
Instructions for setting the temperature and fan speed specifically for the COOL mode.
Method for adjusting the vertical louvres to direct airflow upwards or downwards.
Method for adjusting the horizontal louvres to direct airflow left or right.
Steps to set the timer for the unit to turn off at a specific time.
Additional information and features related to the timer off function.
How to cancel any previously set timer operations.
Procedure to modify existing timer settings.
Guidance on using both ON and OFF timers together for scheduling.
Detailed steps on how to clean the air filters for optimal performance.
Instructions for cleaning the main unit and the remote control.
Steps for proper maintenance after the cooling or heating season ends.
Checks and preparations required before the start of a new operating season.
Initial checks and reasons why the unit might not start or respond.
Specific checks for when the unit is completely unresponsive.
Troubleshooting steps for insufficient cooling performance.
Steps to diagnose and resolve issues with remote control communication.
