To Next PageTo Next Page
Need help?Do you have a question about the Sharp AH-AP18FMF and is the answer not in the manual?
General| Brand | Sharp |
|---|---|
| Model | AH-AP18FMF |
| Category | Air Conditioner |
| Language | English |
General safety precautions for operating the air conditioner.
Safety guidelines for professional installation, removal, or repair of the unit.
Precautions to follow during the normal use of the air conditioner.
Safety considerations for placing and installing the air conditioner unit.
Specifies the operational temperature limits for cooling mode.
Explains the unit's memory function after a power interruption.
Advice on adjusting thermostat settings to conserve energy.
Strategies to reduce energy consumption by managing room conditions.
Guidance on optimizing airflow for efficient operation.
Importance of filter maintenance for optimal unit performance.
Utilizing the timer function to save energy when the unit is not needed.
Recommendation to power down the unit for long periods of non-use.
Identifies and labels components of the indoor air conditioner unit.
Identifies and labels components of the outdoor air conditioner unit.
Description of the remote control unit and its buttons.
Explanation of symbols and indicators on the remote control's screen.
Instructions for inserting batteries into the remote control.
Guidance on operating the remote control and its signal reception.
Warning about direct sunlight affecting the unit's signal receiver.
Warning about fluorescent lamps interfering with remote signal transmission.
Warning about interference from other remote-controlled devices.
Advice on protecting the unit and remote from heat, moisture, and shock.
Guide to selecting operation modes and setting temperature.
Explains automatic operation settings based on room temperature.
Instructions for adjusting the fan speed for different modes.
How to stop the air conditioner's operation.
How to adjust the louvre position for vertical airflow.
How to manually adjust the louvre for horizontal airflow.
Warnings regarding manual adjustments and potential issues.
How to turn on the Plasmacluster ion function.
How to turn off the Plasmacluster ion function.
Important notes regarding Plasmacluster operation and its interaction with other modes.
How to engage the rapid cooling mode.
How to cancel the turbo cooling mode.
Important operational details and limitations of turbo cooling.
Instructions for setting the timer to turn off the unit after one hour.
How to cancel the one-hour timer function.
Key points and operational priorities for the one-hour timer.
How to set the unit to turn off automatically after a specified time.
Advice on using the timer off function, including auto sleep.
How to cancel an active timer setting.
How to modify an existing timer ON or OFF setting.
Instructions for setting the unit to turn on automatically.
Important information regarding timer settings and their interaction.
How to operate the unit using the auxiliary button when the remote is unavailable.
How to stop operation using the auxiliary button.
A note regarding the function of the auxiliary button during normal operation.
Step-by-step guide to cleaning the inside of the indoor unit.
Instructions for properly closing the louvre unit after cleaning.
Detailed steps for removing, cleaning, and reinstalling air filters.
Guidelines for wiping down the unit and remote control.
Recommended steps for preparing the unit after the cooling season.
Recommended checks and cleaning before starting the air conditioner season.
Troubleshooting steps for when the unit fails to start.
Explains the normal swishing sound of refrigerant flow.
Explains potential odors from new components or room furnishings.
Explains the phenomenon of water vapor at the air outlet.
Explains cracking noise due to panel expansion/contraction.
Explains ozone smell from Plasmacluster generator.
Explains buzzing noise related to Plasmacluster ionization.
Checks to perform if the unit does not operate correctly.
Troubleshooting for ineffective cooling performance.
Troubleshooting steps for remote control signal issues.
