To Next PageTo Next Page
Need help?Do you have a question about the Sharp AH-AP18KSY and is the answer not in the manual?
General| Cooling Capacity | 5.0 kW |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Type | Split System |
| Cooling Capacity (W) | 5000 W |
| Power Consumption | 1.5 kW |
General warnings for operating the air conditioner safely.
Safety precautions for installation, removal, and repair.
Specific precautions to take during normal operation.
Precautions related to the unit's installation site.
Identification of parts of the indoor air conditioning unit.
Identification of parts of the outdoor air conditioning unit.
Identifies and explains the functions of the remote control buttons.
Explains symbols and indicators shown on the remote control's LCD screen.
Instructions for inserting batteries into the remote control.
Steps for pointing the remote and sending signals to the unit.
How to choose operation mode and set the desired temperature.
How to set the fan speed for optimal airflow.
Steps for starting and stopping the air conditioner operation.
How to adjust the vertical airflow direction using the remote.
How to adjust the horizontal airflow direction manually.
Setting the unit to automatically turn off after a specified time.
Setting the unit to automatically turn on after a specified time.
Instructions for cleaning and reinstalling the air filters.
How to clean the main unit and the remote control.
Steps for preparing the unit for storage after the cooling season.
Checks to perform before starting the unit at the beginning of the season.
Details on acceptable indoor and outdoor operating temperatures.
How the unit behaves and what to do after a power interruption.
Recommendations for setting the thermostat to save energy.
How to reduce heat gain and loss for energy efficiency.
Tips for achieving best air circulation for efficient operation.
Importance of clean filters for efficient operation.
Utilizing timer functions for energy saving.
Advice on saving power by disconnecting the unit when unused.
Troubleshooting steps when the unit fails to start.
Explanations for unusual smells emitted from the unit.
Explanation for cracking sounds during operation.
Explanation for low buzzing sounds, often from Plasmacluster.
Explanation for soft swishing sounds from refrigerant flow.
Explanation for water vapor appearing at the air outlet.
Explanation for ozone smell from Plasmacluster operation.
Troubleshooting steps for poor cooling performance.
Troubleshooting steps for remote signal reception issues.
