Sharp AH-X18UED - AIR FLOW DIRECTION ADJUSTMENT; Vertical Airflow Adjustment; Horizontal Airflow Adjustment; SUPER JET OPERATION

EN-6
HORIZONTAL AIR FLOW DIRECTION
(High end models)
1
Press the SWING button ( ).
• The horizontal airfl ow louvres will swing.
2
Press the SWING button ( )
again to stop at the desired po-
sition.
(Standard models)
Hold the louvre lever and adjust the
airfl ow direction.
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button ( ).
• The vertical airfl ow louvre will swing.
2
Press the SWING button ( )
again to stop at the desired po-
sition.
• The adjustment range is narrower than
the swing range in order to prevent
condensation from dripping.
ADJUSTING THE AIR FLOW
DIRECTION
1
2
SUPER JET OPERATION
The air conditioner works at the maximum
power and optimum louvre direction to
make the room cool rapidly.
1
During operation, press the
SUPER JET button.
• The remote control will display “ ”.
• The temperature display will go off.
• The vertical airfl ow louvre will be set
obliquely downward.
TO CANCEL
Press the SUPER JET button again.
• The vertical airfl ow louvre will return to the
original direction.
NOTE:
• In AUTO and COOL modes, the air conditioner
will operate at “Extra cooling power” and “Extra
HIGH” fan speed for 15 minutes, and shift to
“HIGH” fan speed.
• In DRY mode, the air conditioner will operate
4°C lower than the set temperature.
• You can not set the temperature or fan speed
during the SUPER JET operation.
1
Louvre lever
1
2
CAUTION:
Never attempt to adjust the swing louvres
manually.
• Manual adjustment of the louvres can cause
the unit to malfunction.
• When the vertical airfl ow louvre is positioned
at the lowest position in the COOL or DRY
mode for an extended period of time,
condensation may result.
AH-XP18SHV-1 (A889)_EN.indd EN-6AH-XP18SHV-1 (A889)_EN.indd EN-6 11/8/2559 BE 2:36 PM11/8/2559 BE 2:36 PM