EN-7
HORIZONTAL AIR FLOW DIRECTION
(For Premium models)
1
Press the SWING button ( ).
• The horizontal airfl ow louver will swing.
• The lighting bar will wave to show the
swing direction.
For more information, refer to page EN-13.
(For XP10/13UXD, XP10/15UF models only)
2
Press the SWING button ( ) again
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvers manually.
• Manual adjustment of the louvers can cause
the unit to malfunction.
• When the vertical adjustment louver is
positioned at the lowest position in the COOL
or DRY mode for an extended period of time,
condensation may result.
NOTE:
• The adjustment range is narrower than the
swing range in order to prevent condensation
from dripping.
(For Standard models)
Hold the horizontal airfl ow louver lever
and adjust the airfl ow direction.
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button ( ) to set
the desired airfl ow direction.
In AUTO mode, airfl ow direction cannot be
set to “ ”.
ADJUSTING THE AIR FLOW DIRECTION
1
SEN SO R
1
2
Louver lever
TINSEB026JBRZ.indb EN-7TINSEB026JBRZ.indb EN-7 4/28/2560 BE 2:49 PM4/28/2560 BE 2:49 PM
To Next Page
Loading...
Need help?
General
