1
Accessories
TINSEA216AWZZ
08D R MW 1
2
Installing the main unit and
the subwoofer
3
Remote control battery installation
4
To turn the power on
1 Open the battery cover.
2 Insert the batteries as shown.
3 Close the cover.
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
MODEL
AN-PR1500H
HOME CINEMA RACK SYSTEM
This quick Start Guide will help you to correctly install and operate your system.
1
Wire clips x 5
Wooden shelf board x 1
FM aerial x 1
Screw cover x 8
Remote control x 1
"AA" size batteries (UM/SUM-3,
R6, HP-7 or similar) x 2
Top glass cover x 1
Cleaning cloth x 1
HMDI cable x 1
1. Pull up both speakers outwards.
2. Turn the unit. Place the glass shelf on top of it.
3. Place the wooden shelf on top of the screw.
4. Cover the screws on the speakers with the screw covers provided.
Notes:
It is advisable for the top glass cover to be carried by 2 persons.
Top glass with sticker on its surface, must face upwards.
The maximum load for the top glass cover on the unit is 80 kg.
The glass is made of reinforced glass, but dropping pointed objects on it
or strongly hitting the surface may cause it to break.
The top glass cover and wooden shelf board are not fastened to the unit.
Take care when transporting the unit, otherwise these parts may fall off
and there is a risk of damage and injury.
Protection
sheet
Top glass cover cushion
Wooden shelf
Top glass cover
Sticker up side
Screw cover
After checking all the connections have been made correctly, connect the
AC power lead to the wall socket.
Wall socket
(AC 220 - 240 V ~ 50 Hz)
To Next Page
Need help?
General
