Connecting with Bluetooth transmitter (pairing)
Pairing with Bluetooth transmitter
1. Connect the Bluetooth transmitter to a TV
etc. Set the “input select” switch to the
connected audio cable or optical cable.
2. Press and hold the PAIRING button on the
Bluetooth transmitter for about 2 seconds.
Bluetooth transmitter indicator blinks blue.
3. Press and hold the POWER button on
the sound partner for about 2 seconds to
turn it on.
z When pairing is completed, you can hear the sound “CONNECTED”
from sound partner.
z If you cannot pair automatically, please keep pressing the “Bluetooth”
button of the sound partner for about 2 seconds.
Notes:
z The Bluetooth transmitter is only for the sound partner (AN-SS2 ). It
cannot connect to other devices.
z If the connection between the supplied Bluetooth transmitter and
the sound partner does not work well, press and hold the Bluetooth
transmitter PAIRING button for about 10 seconds to reset, and try
again.
Indicator status:
Status Status indicator (Blue)
During pairing Blinks once in every seconds.
Successful pairing Lights up for about 3 seconds.
Connected Blinks once every 5 seconds.
Unconnected Blinks twice every 5 seconds.
OPTICAL AUDI O PAIRING
Bluetooth transmitter
Indicator
Pairing Button
To Next Page
Loading...
Need help?
General
