Listening to the TV sound
1. Connect the paired Bluetooth transmitter to the TV
2. Set the Bluetooth transmitter’s input selector switch to the connected
audio cable or optical cable.
3. Turn on the TV and hold the POWER button on the sound partner’s for
2 seconds to turn it on.
If the sound partner does not connect, make the connection again follow
the procedure on page 11.
Volume control
Press the
button to increase the volume
and press the
button to decrease the
volume.
– When the volume level is set to maximum
– The volume does not change when press
quickly and continuously.
Muting
The volume is muted temporarily when pressing the
button.
Press again to restore the volume.
Notes:
z When you are listening to audio by connecting an audio cable to the
headphone socket, the sound of the TV may be lower even if you
increase the volume of the sound partner unit, please increase the
headphone volume on the TV.
– If you want to output audio from both the TV speakers and the sound
partner, please refer to the TV instruction manual.
– If the product does not output audio from the TV’s speaker with the
audio cable connected, disconnect the audio cable from the
headphone socket before listening to audio using the TV’s speaker.
z Two sound partner units can be connected to one supplied Bluetooth
transmitter. If you want to connect a second device, turn off the power
of the first sound partner, and then hold the Bluetooth transmitter's
PAIRING button for about 2 seconds to pair it. Turn on the second
sound partner unit and hold the “Bluetooth” button for about 2 seconds.
When the second pairing is complete, please power on the first sound
partner.
LEAR
VOICE
Volume / Song Selection Button
Play / Pause / MODE Button
To Next Page
Loading...
Need help?
General
