Why is my Sharp Speakers Bluetooth sound interrupted?
If the Bluetooth sound from your Sharp speakers is interrupted or distorted, it could be due to interference from devices generating electromagnetic radiation or an obstacle between the unit and your Bluetooth audio source device. Try removing any potential sources of interference or obstructions.
What to do if no sound is heard from Sharp Sound Partner Speakers?
If you are not hearing any sound from your Sharp speakers, it could be due to several reasons. Ensure that the volume isn't set to the minimum or that the unit isn't turned off. Also, check that the unit is properly paired with the Bluetooth audio source device and is not too far away from it.
How to fix Sharp Sound Partner Speakers when a button is pressed, the unit does not respond?
If your Sharp speakers are unresponsive when a button is pressed, try turning the unit off and then turning it back on.
Product uses RF fields for Bluetooth communication within the 2.4 GHz range.
Listen at safe volume levels to prevent permanent hearing loss and ringing in ears.
Rechargeable battery lifespan depends on proper care and treatment.
Handle batteries carefully, avoid extreme temperatures to maintain capacity.
Proper disposal methods for batteries and equipment, return to collection points.
Product compliance with EU Directive 2014/53/EU; full text available online.
Contains dangerous voltages; no user-serviceable parts. Remove plug before service.
Audio-visual material copyright and Norway usage restrictions.
Avoid dropping, heavy objects, extreme conditions, and magnetic fields.
Use in moderate climate, ensure ventilation, avoid liquids and flames.
Identification of buttons and ports on the Sound Partner unit.
Identification of ports and buttons on the Bluetooth transmitter.
Instructions for connecting the charging cable and understanding LED indicators.
How to turn on the device using the power switch.
How to check battery level using the Jog button and LED indicators.
Notes on battery performance, life, charging, and power supply requirements.
Explanation of Bluetooth wireless technology and its operating range.
Supported Bluetooth profiles and Qualcomm aptX audio features.
Refer to mobile phone manual for Bluetooth connection details.
Unit memorizes up to 8 devices; pairing new ones replaces the oldest.
Step-by-step guide for fast pairing with a source device.
Tips for successful pairing, including proximity and source device handling.
Detailed steps for manually connecting via Bluetooth.
How the unit automatically re-establishes Bluetooth connection.
Notes on device compatibility and potential connection issues.
Factors affecting signal strength like nearby devices and walls.
Memorizing up to 8 devices; deletion and re-pairing procedures.
Functions for play, pause, volume, track skipping, and mode switching.
How to activate and cancel voice control features.
Behavior and reconnection attempts when the device is out of range.
How to answer, end, redial, and decline calls.
How to transfer call audio between the speaker and mobile phone.
Procedures for answering a second call and switching between active calls.
How to mute and unmute the microphone during a call.
Note that remote call functions may not be universally supported.
Instructions for connecting the transmitter to a TV using an AUX cable.
Connecting the transmitter to a TV using USB extension and AUX cables.
Cautions regarding interference, TV compatibility, and volume settings.
Transmitter supports plug-and-play connection with a PC.
Manual steps to pair the transmitter with the Sound Partner.
Pairing the transmitter with up to two Sound Partners simultaneously.
How the transmitter automatically reconnects to the Sound Partner.
Advice to retry pairing if initial connection attempts fail.
Explains LED blinking patterns for power and connection states.
Controls for Speaker On/Off in TV and PC connection modes.
Solutions for unresponsive buttons or lack of sound.
Solutions for no sound or interrupted/distorted Bluetooth audio.
Guide for safe removal of the Li-ion battery for proper disposal.
Precautions for handling small parts, preventing leakage, and avoiding misuse.
Steps for removing screw rubbers, screws, and the upper case.
Detailed steps for removing the battery, including cutting wires.
How to clean the unit and cautions against chemicals or oil.
Technical specifications for the Sound Partner unit.
Technical specifications for the Bluetooth Wireless Transmitter.
How the transmitter behaves when out of range and reconnection attempts.
To Next Page
General
