Sharp HT-SB350(W)

Questions and Answers:

K
Kevin AtkinsAug 8, 2025
What to do if Sharp HT-SB350(W) remote control does not operate properly?
- R
  Rebekah LopezAug 8, 2025
  If the Sharp Speakers' remote control isn't working correctly, please check these possible causes: * Confirm the battery polarity is correct. * Ensure the battery isn't dead; replace it if necessary. * Verify the distance and angle between the remote and the unit are appropriate. * Remove any obstructions blocking the remote sensor. * Make sure there isn't strong light interfering with the remote sensor. * Avoid using remote controls for other equipment simultaneously.
A
Amy HollandAug 11, 2025
What to do if Sharp HT-SB350(W) unit does not respond when a button is pressed?
- A
  Andre WilliamsAug 11, 2025
  If your Sharp Speakers aren't responding when you press a button, try setting the unit to stand-by mode and then turning it back on.
T
Tara CainAug 16, 2025
Why is there no sound coming from my Sharp Speakers?
- S
  Steven SnyderAug 16, 2025
  If you're not hearing any sound from your Sharp Speakers, there are a few things to check: * Ensure the input signal is correctly selected. * Verify the volume isn't set to "0". Adjust it as needed. * Confirm that muting isn't activated. If it is, deactivate it.
R
Rhonda RobertsonAug 21, 2025
What to do if my Sharp HT-SB350(W) Speakers power is not turned on?
- A
  Alexandra ThompsonAug 21, 2025
  If your Sharp Speakers aren't turning on, try these steps: 1. Make sure the unit is properly plugged into a power outlet. 2. If it still doesn't turn on, the protection circuit might be activated. Unplug the power lead, wait for at least 5 minutes, and then plug it back in.
J
Jamie NavarroAug 25, 2025
How to stop noise during playback on Sharp Speakers?
- J
  Jaclyn LewisAug 26, 2025
  If you're hearing noise during playback with your Sharp Speakers, move the unit away from computers or mobile phones.
C
Carla TaylorAug 29, 2025
Why is information not displayed on my Sharp Speakers even when turned on?
- J
  Jamie PerezAug 29, 2025
  If the display isn't showing information even when your Sharp Speakers are on, check if the unit is set to “Dimmer display off” mode.
B
brandonowensSep 2, 2025
Why can't I operate my TV with the Sharp HT-SB350(W) remote control?
- T
  taylor19Sep 3, 2025
  Depending on the model, some or all functions of your TV may not be operable using the Sharp Speakers' remote control. Use the remote control supplied with the TV.