To Next PageTo Next PageWhat to do if Sharp PS-935 power is not turned on?
If your Sharp Speakers are not turning on, it could be due to the following reasons: * The unit may not have enough battery power. Charge the battery. * The protection circuit might be activated. Try switching the unit off and on again. * The battery might be completely depleted. Recharge the battery.
What to do if Sharp Speakers device cannot be detected?
If your Sharp Speakers device cannot be detected, and playback doesn't start: * There might not be an MP3 file inside the device. Add an MP3 file to the device. * The device might not be properly connected. Ensure the device is properly connected. * It might be an MTP device. Use a compatible device. * The device might contain only an AAC file. Use a device that contains MP3 files. * A false MP3 file might be playing. Ensure a valid MP3 file is being played.
How to fix no sound on Sharp Speakers?
If you're not hearing any sound from your Sharp Speakers, there might be a few reasons: * The input signal might not be set correctly. Ensure the input signal is properly configured. * The volume level could be set to “00”. Try increasing the volume. * Muting might be activated on an external device. Deactivate muting on any connected external devices.
Why is there no sound from my Sharp Bluetooth Speakers?
If you are experiencing a lack of sound from your Sharp Bluetooth Speakers, consider these possibilities: * The unit might be too far from the Bluetooth audio source device. Bring the unit closer to the Bluetooth audio source device. * The unit might not be paired with the Bluetooth audio source device. Pair the unit with the Bluetooth audio source device.
How to resolve interrupted Bluetooth sound on Sharp PS-935?
If the Bluetooth sound on your Sharp Speakers is interrupted or distorted: * The unit might be too near to a device that generates electromagnetic radiation. Move the unit away from devices that generate electromagnetic radiation. * There might be an obstacle between the unit and the Bluetooth audio source device. Remove the obstacle.
What to do if a problem occurs during Sharp Speakers operation?
If a problem occurs during the operation of your Sharp Speakers: * Try switching the unit off and on again. * Perform the reset operation.
Why is noise heard during Sharp PS-935 playback?
If you hear noise during playback on your Sharp Speakers, move the speaker away from any computers or mobile phones.
Why is Sharp Speakers time display wrong?
If your Sharp Speakers are displaying the wrong time, it could be because Variable Bitrate files are being played back. Stop playback of Variable Bitrate files.
What to do if condensation may cause Sharp PS-935 Speakers to malfunction?
If condensation may cause your Sharp Speakers to malfunction, leave the unit for an hour and wipe off any condensation with a soft cloth before operating.
Important cautions for operation and safety.
Essential safety precautions for product use and installation.
Specific safety advice regarding power sources and object entry.
Information on RF exposure compliance for Bluetooth operation.
Guidelines for unit placement, environment, and general handling.
Warnings related to battery replacement and extreme temperatures.
Terms and conditions of the warranty for US customers.
Terms and conditions of the warranty for Canadian customers.
Identification and function of controls on the top panel.
Instructions for connecting the power adapter to the unit.
Pairing and operating the unit via Bluetooth.
Common issues like no sound or noise and their solutions.
General
