Specifications (Hong Kong only)
Item Model: 4T-C50BK1X Model: 4T-C60BK1X Model: 4T-C70BK1X
LCD panel 126 cm 153 cm 177 cm
Resolution 8,294,400 pixels (3840 x 2160)
Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV Function
TV-standard
Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC
Digital DTMB
Receiving
Channel
VHF/UHF 44.25—863.25 MHz
CATV S1—S41 ch (including Hyperband)
TV-tuning system Auto Preset
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G MTS: M
Audio amplifier 10 W x 2
Terminals
ANT
(Antenna input)
Analogue
UHF/VHF 75 Ω DIN type
Digital
SERVICE ONLY 3.5 mm jack
INPUT 1 (ARC) HDMI HDMI (HDMI input), ARC
INPUT 2 HDMI HDMI (HDMI input)
AV IN AUDIO in, VIDEO in
USB 1 USB (DC5V 0.5A output)
USB 2 USB (DC5V 1.5A output)
LAN (10/100 BASE-T) Network connector
DIGITAL AUDIO OUTPUT Optical S/PDIF digital audio output
OUTPUT Headphone ( 3.5 mm stereo)
OSD language
English/Simplified Chinese/Traditional Chinese/Hong Kong Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/Vietnamese/Indonesia/
Hebrew/Hindi/Malay
English/Simplified Chinese/Traditional Chinese (For DTV-HK)
Power Requirement AC 110 — 240 V, 50/60 Hz
Power Consumption 124 W (0.5 W Standby) 160 W (0.5 W Standby) 225 W (0.5 W Standby)
Dimensions without stand 1122 (W) x 666 (H) x 74 (D) mm 1359 (W) x 790 (H) x 50 (D) mm 1563 (W) x 904 (H) x 52 (D) mm
with stand 1122 (W) x 708 (H) x 253 (D) mm 1359 (W) x 852 (H) x 257 (D) mm 1563 (W) x 978 (H) x 334 (D) mm
Weight without stand (with stand) 12.0 kg (12.5 kg) 21.5 kg (22.0 kg) 31.5 kg (32.5 kg)
Operating temperature 0°C to +40°C
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in individual units.
Specification may differ depending on the selected country.
CAUTION
Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no
responsibility for improper mounting or mounting that results in accident or injury.
Carefully read the instructions that come with the bracket before beginning work.
Appendix
EN 8-7
ENGLISH | 中文(台灣) | 中文(香港) | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
>><<
To Next Page
Loading...
Need help?
General