Sharp AQUOS LC-15E1U

ADJUSTMENT (Continued)
• Saving broadcast TV channels in the memory
1 Press MENU to display the MENU
screen, press
J../T to move the
cursor to SET UP, and press
~/~
to enter.
2 Press J../T to move the cursor to
CH-SETTING, and press
~/~ to
enter.
3 Press ~JT to move the cursor to
CH SEARCH, and press ~/~ to
enter.
CH-SETT ING
E>RETURN
AI R/CABlE~
[lJ CH SEARCH~
CH MEMORY~
CD CD CD
000
GJCD0
@CQ)@
SHARP
4 Press ~. The tuner will search
through all available channels
in
your area and add them to the
TV's memory.
INOTE >
• To interrupt CH SEARCH, press ~.
CH SEARCH will stop at the current
channel and will not add any higher
channels.
CH SEARCH
AIR 2
START:@
EXIT:g
5 Press MENU to exit.
AIR 2
CH MEMORY
TO ADD:@ EXIT:.
\
:
add channel 2 It: erase channel 2
to the TV memory to the TV memory
Channel
Select
• Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to display the MENU CH-SETTING
screen, press ~JT to move the E>RETURN
cursor to SET UP, and press ~/~ ~~R~~~~~~:
to enter. [lJ CH MEMORY~
2 Press J../T to move the cursor to
CH-SETTING, and press
~/~ to
enter.
3 Press J../T to move the cursor to
CH MEMORY, and press ~/~ to
enter.
4 Use J../T or Channel Select to
select each desired channel to add
or erase.
5 Press ~ to add the channel to the
TV's memory or press
~ to erase
the channel from the TV's memory.
6 Press MENU to exit.
SHARP
CH MEMORY
AIR 2
TO ERASE:@
INOTE >
• If CH SEARCH is performed again, the previously memorized channels will be lost.
EXIT:.
I