Sharp Aquos LC-24LE150M - Programme Setup and Editing; Picture and Audio Settings; Selecting AV Modes; Picture Menu Adjustments

9 10
Menu operation
1
Press MENU and the MENU screen displays.
AV m od e
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Colour temp.
Standard
High
Enter
+ 8
30
0
+ 8
0
+ 2
cdb
2
Press
c
/
d
to select the desired menu. (Picture,
Audio, Setup, Function)
3
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Programme Setup (Continued)
Programme edit
1
Repeat steps 1 to 2 in Auto tuning.
2
Press
a
/
b
to select “Programme edit”, and
then press ENTER.
3
Press
a
/
b
to select which channel to edit.
4
Press ENTER again to edit below items.
H
CH (Channel)
Display channel number.
H
Label
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press
a
/
b
: To select a desired alphanumeric.
• Press
c
/
d
: To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
H
Skip
Channels with “Skip” set to “X” are passed over
when using CH
r
/
s
even if selected while
watching the image from the TV.
H
Sort
Channel position can be sorted freely.
Input setting
H
Colour system (AV input mode only)
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43)
NOTE
• If “Auto” is selected, colour system is automatically set.
If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a
composite signal.
H
Label
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press
a
/
b
: To select a desired alphanumeric.
• Press
c
/
d
: To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
Picture menu
AV m od e
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Colour temp.
Standard
High
Enter
+ 8
30
0
+ 8
0
+ 2
cdb
H
Picture adjustments
Selected item
c
button
d
button
Backlight
The screen dims The screen
brightens
Contrast
For less contrast For more contrast
Brightness
For less brightness For more
brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
reddish
Skin tones become
greenish
Sharpness
For less sharpness For more
sharpness
H
Colour temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Selected item Description
High
White with bluish tone
Middle
Low
White with reddish tone
H
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Off, Low, Middle, High)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press
a
/
b
to select “Reset”, press ENTER, press
a
/
b
to select “Yes”, and then press ENTER.
Selecting a preset AV Mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1
Press AV MODE.
2
Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode”
menu on the “Picture” menu screen.
Selected item Description
Standard
For a highly defi ned image in a normally
bright room.
Movie
For a movie.
Dynamic
For a clear-cut image emphasising high
contrast for sports viewing.
Dynamic
(fi xed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
PC
For PC. (Available only when receiving a
PC signal via INPUT 1 (HDMI) terminal.)
NOTE
• You can select a different AV mode item for each input
mode. (For example, select Standard for TV input and
Dynamic for VIDEO input.)
LC-24LE150M_F906_EN.indd 5LC-24LE150M_F906_EN.indd 5 6/11/2013 12:00:33 PM6/11/2013 12:00:33 PM