Connecting a PC
Connecting a PC
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 36 for a list of PC signals compatible with the
TV.
• Macintosh adaptor may be required for use for some
Macintosh computers.
• When connecting to a PC, the correct input signal type is
automatically detected except 1024 g 768 and 1360 g
768 signals.
PC
PC
RGB cable
EXT 7
ø 3.5 mm stereo minijack cable
ø 3.5 mm stereo minijack cable
EXT 7
Displaying a PC image on the screen
Selecting the picture size
You can select the picture size.
Press
f.
• The WIDE MODE menu displays.
Press f or a/b to select a desired item on
the menu.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
1
2
Normal Full
Item
Full: An image fully fills the screen.
Cinema: For letter box pictures. Bars may appear on the
top and bottom with some programmes.
Normal:
Keeps the original aspect ratio in a full screen
display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.
Analogue Connection
EXT 4 or 5
HDMI cable
EXAMPLE
PC
HDMI Connection
PC
EXT 6
DVI/HDMI conversion cable
ø 3.5 mm stereo minijack cable
RGB/DVI conversion cable
NOTE
• Refer to page 29 for AV signals (480i/480p/576i/576p/
720p/1080i/1080p). The analogue D-sub terminal (EXT7) is
not compatible with 480i/576i/1080p signals.
33
To Next Page
Loading...
