Sharp Aquos LC-32D53X

Press MENU and the MENU screen displays.
1
Press
a
/
b
to select “3D-Y/C”, and then press
ENTER.
4
Press
a
/
b
to select the desired level, and
then press ENTER.
5
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item
Standard
Fast
Slow
Off
Description
Normal adjustment
For movie image
For still image
3D-Y/C off
Repeat steps 1 to 3 in 3D-Y/C.
1
Press
c
/
d
to select “Picture”.
2
Press
a
/
b
to select “Advanced”, and then
press ENTER.
3
Monochrome
For viewing a video in monochrome.
Press
a
/
b
to select “Monochrome”, and then
press ENTER.
2
Press
a
/
b
to select “On”, and then press
ENTER.
3
Audio adjustment
You can adjust the sound quality to your preference
with the following settings.
NOTE
• For resetting all adjustment items to factory preset values,
press
a
/
b
to select “Reset”, press ENTER, press
a
/
b
to select “Yes”, and then press ENTER.
Press
c
/
d
to select “Audio”.
2
Press MENU and the MENU screen displays.
1
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
3
Audio
Treble
Bass
Balance
Surround
Reset
[ 0]
[ 0] L
+
[ 0]
+
R
STANDARD
Power Control
Selected item
Treble
Bass
Balance
c
button
For weaker treble
For weaker bass
Decrease audio from
the right speaker
d
button
For stronger treble
For stronger bass
Decrease audio
from the left
speaker
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
4
26
Black
Film Mode
Fine Motion Advanced
Colour Temp.
3D – Y/C
Monochrome
Standard
Fast
Slow
Off
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Basic adjustment settings (Analogue/Digital)
D53X_en_e.indd 26D53X_en_e.indd 26 2007-7-31 8:29:302007-7-31 8:29:30