TV
DTV
INPUT1
INPUT2
DVD
INPUT4
INPUT5
39
Input Label
You can assign each input source a label you like.
Useful adjustment settings
Repeat the above until the name is fully spelt
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
(Example)
NOTE
• You cannot change labels if the input source is TV or DTV.
6
Press TV/VIDEO to select the desired input
source.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Input Label”, and then
press ENTER.
4
Press
a
/
b
to select characters and
c
/
d
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
c
/
d
to move to “CLEAR” on the “Input Label”
screen, and then press ENTER.
5
Input Skip
This setting allows you to skip the HDMI or PC input
on the Input Selection operation.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Input Skip”, and then
press ENTER.
3
Press
a
/
b
to select the Input (INPUT 3,
INPUT 4 or INPUT 5) you wish to skip, and
then press ENTER.
4
Yes
No
INPUT 3
INPUT 4
INPUT 5
Press
a
/
b
to select “Yes”, and then press
ENTER.
5
Press MENU to exit.
6
D53X_en_g.indd 39D53X_en_g.indd 39 2007-8-6 16:39:222007-8-6 16:39:22
To Next Page
Loading...
