32
Appendix
Removing the stand
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
NOTE
• To attach the stand, perform the above steps in reverse order.
Before performing work spread cushioning over the base area to lay the TV on, making sure the area is
completely fl at. This will prevent it from being damaged.
CAUTION
• Do not remove the stand and speakers from the TV unless using an optional bracket to mount it.
Unfasten the screws used to secure
the stand in place.
Unfasten the four screws used to
secure the stand in place.
123
Detach the stand from the TV.
(Hold the stand so it will not drop from
the edge of the base area.)
LC-37GE1E_gb_d.indd 32LC-37GE1E_gb_d.indd 32 2006/08/24 15:17:572006/08/24 15:17:57
To Next Page
Loading...
