33
Removing the speakers
NOTE
• To attach the speakers, perform the steps in reverse order.
Disconnect the cable from the speakers.
Perform the same steps for both sides.
Unfasten the screws.
Perform the same steps for both sides.
1
2
When reconnecting the speakers, make sure to
connect the speaker terminal and cable polarity
(
k
,
l
) properly, as incorrect connection results in
different stereo orientation.
CAUTION
• Make sure external speakers have 4 ohm and 15 watt
specifi cations.
• The speaker terminals are connected from within
to a DC power supply. Make sure that no other DC
power supply is applied, and do not connect the earth
contact to the speaker terminals.
Appendix
LC-37GE1E_gb_d.indd 33LC-37GE1E_gb_d.indd 33 2006/08/24 15:18:022006/08/24 15:18:02
To Next Page
Loading...
