Sharp AQUOS LC-42D64U

Basic adjustment settings
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes
it then recreates
each still film frame for high-definition picture quality.
You can adjust the sound quality
to your preference
with the following settings.
On
Off
Detects, analyzes, converts film source
Normal viewing mode
VOL CH
SURR o UND (9 (JMUTE
e (d v a
For stronger treble
For weaker treble
Press ...... /~ to adjust the item to the desired
level.
Press
./T to select a specific adjustment
item.
EXIT ......
a a
- FAVORITE CH -
0®@@
Press MENU to display the MENU screen, and
then press
...... /~ to select "Audio".
[ ~ Audio
Treble
For moving images
Normal adjustment
For Game Mode
For still images
Off (20)
Fast
Standard
Slow
• 30- Y IC is available for input signal from Composite Video
and analog broadcasts
(air and cable).
• "Film Mode" does not function when you set the
"AV Mode"
to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Provides high quality images with minimal dot crawl
and cross color noise.
For viewing a video
in monochrome.
• Audio menu is grayed out when Output Select is set to
"Variable".
• For resetting
all Audio adjustment items to the factory
preset values, press
.. IT to select "Reset", press ENTER,
press ~/~ to select "Yes", and then press ENTER.
Press MENU to exit.
For stronger bass
Decrease audio from Decrease audio
the right speaker from the left
speaker
For weaker bass
Balance
Bass
- 16 through + 15
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
+ 16 and a minimum of - 16.
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate
if the adjustment range is
small.
@- 28
Basic adjustment settings
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes
it then recreates
each still film frame for high-definition picture quality.
You can adjust the sound quality
to your preference
with the following settings.
On
Off
Detects, analyzes, converts film source
Normal viewing mode
VOL CH
SURR o UND (9 (JMUTE
e (d v a
For stronger treble
For weaker treble
Press ...... /~ to adjust the item to the desired
level.
Press
./T to select a specific adjustment
item.
EXIT ......
a a
- FAVORITE CH -
0®@@
Press MENU to display the MENU screen, and
then press
...... /~ to select "Audio".
[ ~ Audio
Treble
For moving images
Normal adjustment
For Game Mode
For still images
Off (20)
Fast
Standard
Slow
• 30- Y IC is available for input signal from Composite Video
and analog broadcasts
(air and cable).
• "Film Mode" does not function when you set the
"AV Mode"
to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Provides high quality images with minimal dot crawl
and cross color noise.
For viewing a video
in monochrome.
• Audio menu is grayed out when Output Select is set to
"Variable".
• For resetting
all Audio adjustment items to the factory
preset values, press
.. IT to select "Reset", press ENTER,
press ~/~ to select "Yes", and then press ENTER.
Press MENU to exit.
For stronger bass
Decrease audio from Decrease audio
the right speaker from the left
speaker
For weaker bass
Balance
Bass
- 16 through + 15
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
+ 16 and a minimum of - 16.
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate
if the adjustment range is
small.
@- 28