IMPORTANT INFORMATION
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A
CART,
STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURERIS
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state
that
any unauthorized changes
or
modifications
to
this
equipment
not
expressly
approved
by
the
manufacturer
could
void
the
user's authority
to
operate this equipment.
CAUTION:
This
product
satisfies FCC regulations when shielded cables and
connectors
are used
to
connect
the
unit
to
other
equipment.
To
prevent
electromagnetic
interference with electric appliances such as radios and televisions, use shielded
cables and
connectors
for
connections.
DECLARATION
OF
CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL
LC-42D64U/LC-46D64U/LC-52D64U
This device complies with Part 15
of
the FCC Rules. Operation is subject
to
the
following
two
conditions:
(1)
This device may not cause harmful interference, and
(2)
this device
must
accept
any interference
received, including interference that
may
cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah,
New
Jersey
07430-2135
TEL: 1-BOO-BE-SHARP
For Business Customers:
URL
http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15
of the
FCC
Rules. These limits
are
designed to provide reasonable protection against harmful interference
in
a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance with the
instructions, may cause harmful interference to radio communications. However, there
is
no guarantee that interference will not
occur
in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into
an
outlet
on
a circuit different from that to which the receiver
is
connected.
- Consult the dealer or
an
experienced radiofTV technician for help.
"Note
to
CATV
system installer: This reminder
is
provided to call the
CATV
system installer's attention
to
Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and,
in
particular, specifies that the cable ground shall be connected
to
the
grounding system of the building, as close
to
the point of cable entry as practical."
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount
of
mercury. Disposal
of
these materials may be regulated due
to
environmental
considerations. For disposal or recycling information, please contact your local
authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling
organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP
(For U.S.A. only)
Trademarks
•
Manufactured
under
license
from
Dolby
Laboratories.
"Dolby"
and
the
double-D
symbol
are
trademarks
of
Dolby
Laboratories.
•
"HDMI,
the
HDMIIogo
and High-Definition
Multimedia
Interface are
trademarks
or
registered
trademarks
of
HDMI
Licensing
LLC."
•
Products
that
have earned
the
ENERGY STAR® are
designed
to
protect
the
environment
through
superior
energy
efficiency.
(@-
2
IMPORTANT INFORMATION
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A
CART,
STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURERIS
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state
that
any unauthorized changes
or
modifications
to
this
equipment
not
expressly
approved
by
the
manufacturer
could
void
the
user's authority
to
operate this equipment.
CAUTION:
This
product
satisfies FCC regulations when shielded cables and
connectors
are used
to
connect
the
unit
to
other
equipment.
To
prevent
electromagnetic
interference with electric appliances such as radios and televisions, use shielded
cables and
connectors
for
connections.
DECLARATION
OF
CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL
LC-42D64U/LC-46D64U/LC-52D64U
This device complies with Part 15
of
the FCC Rules. Operation is subject
to
the
following
two
conditions:
(1)
This device may not cause harmful interference, and
(2)
this device
must
accept
any interference
received, including interference that
may
cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah,
New
Jersey
07430-2135
TEL: 1-BOO-BE-SHARP
For Business Customers:
URL
http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15
of the
FCC
Rules. These limits
are
designed to provide reasonable protection against harmful interference
in
a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance with the
instructions, may cause harmful interference to radio communications. However, there
is
no guarantee that interference will not
occur
in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into
an
outlet
on
a circuit different from that to which the receiver
is
connected.
- Consult the dealer or
an
experienced radiofTV technician for help.
"Note
to
CATV
system installer: This reminder
is
provided to call the
CATV
system installer's attention
to
Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and,
in
particular, specifies that the cable ground shall be connected
to
the
grounding system of the building, as close
to
the point of cable entry as practical."
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount
of
mercury. Disposal
of
these materials may be regulated due
to
environmental
considerations. For disposal or recycling information, please contact your local
authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling
organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP
(For U.S.A. only)
Trademarks
•
Manufactured
under
license
from
Dolby
Laboratories.
"Dolby"
and
the
double-D
symbol
are
trademarks
of
Dolby
Laboratories.
•
"HDMI,
the
HDMIIogo
and High-Definition
Multimedia
Interface are
trademarks
or
registered
trademarks
of
HDMI
Licensing
LLC."
•
Products
that
have earned
the
ENERGY STAR® are
designed
to
protect
the
environment
through
superior
energy
efficiency.
(@-
2
To Next Page
Loading...
