Sharp AQUOS LC-42D64U

Useful adjustment settings
Input the 4-digit secret number by using 0-9.
Clearing the secret number
Allows you to clear your secret number.
Repeat steps 1 and 2
in Setting a secret
number.
• The secret number setting menu displays.
Changing the secret number
Allows you to change your current secret number.
Repeat steps 1 and 2
in Setting a secret
number.
• The secret number setting menu displays.
Input the 4-digit secret number by using 0-9.
Press ia./T to select "Secret No.", and then
press ENTER.
Press
./T to select "Secret No. Clear", and
then press ENTER.
Input the old 4-digit secret number by using
0-
9.
Press ia./T to select "Secret No.", and then
press ENTER.
Press
MENU to exit.
Press
~/~ to select "Yes", and then press
ENTER.
• See page 41 for re-registering a new secret number after
being cleared.
• As a precautionary measure, make a note of your
secret number and keep it
in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
Input the new 4-digit secret number by using a
-9.
Press ia./T to select "New Secret No.", and
then press ENTER.
Input the same 4-digit number
on the
"Reconfirm" screen
as in step 6 to confirm.
Press
MENU to exit.
@)- 42
Useful adjustment settings
Input the 4-digit secret number by using 0-9.
Clearing the secret number
Allows you to clear your secret number.
Repeat steps 1 and 2
in Setting a secret
number.
• The secret number setting menu displays.
Changing the secret number
Allows you to change your current secret number.
Repeat steps 1 and 2
in Setting a secret
number.
• The secret number setting menu displays.
Input the 4-digit secret number by using 0-9.
Press ia./T to select "Secret No.", and then
press ENTER.
Press
./T to select "Secret No. Clear", and
then press ENTER.
Input the old 4-digit secret number by using
0-
9.
Press ia./T to select "Secret No.", and then
press ENTER.
Press
MENU to exit.
Press
~/~ to select "Yes", and then press
ENTER.
• See page 41 for re-registering a new secret number after
being cleared.
• As a precautionary measure, make a note of your
secret number and keep it
in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
Input the new 4-digit secret number by using a
-9.
Press ia./T to select "New Secret No.", and
then press ENTER.
Input the same 4-digit number
on the
"Reconfirm" screen
as in step 6 to confirm.
Press
MENU to exit.
@)- 42