10
STEP 3. EstaElish a netZork connection
1.Press
the
button
on the remote control
and then
press
>
to enter the Settings menu
.
2.Select NetZork ĺ NetZork Con¿guration.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
EstaElish a Zired netZork connection
Automaticall\ oEtain an IP address
1.Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default oStion of IP Setting Mode is DHCP.
2.If the connection fails then "Disconnected" will display for the Ethernet status. Retry or select Manual to input the information again.
Manuall\ enter the IP address
1.Select
Manual.
2.Enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternative DNS in the menu. Next, select Connect.
To Next Page
Loading...
