6
STEP 1. Attach the TV Stand or Wall Mount Bracket
Attach the TV Stand
CAUTION:
Be sure to disconnect the AC SoZer cord Eefore installing a stand or Wall-Mount Erackets.
The LED disSla\ is ver\ fragile and must Ee Srotected at all times Zhen installing the legs that form the stand. Be sure to
Srotect the
TV screen from getting scratched or damaged E\ an\ hard oEMects. In addition DO NOT e[ert Sressure on the
front of the TV at an\
time Eecause it could crack.
Follow the illustrations and instructions below to complete the installation steps:
Screw
M4×25 (43")
M4×20 (50"/55")
BASE STAND
Screw
M4×25 (43")
M4×20 (50"/55")
BASE STAND
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
3. Secure the base stand to the TV with the 4 screws in accessary tightly.
To Next Page
Loading...
