Using external equipment
To view external source images, select the input
source from
INPUT on the remote control unit or on
the
N.
If
the image does not come
in
clearly from the external
equipment connected to INPUT 1 or
3,
you may need
to change the input signal type setting on the "Input
Select" menu.
Press
MENU to exit.
• The setting
is
stored and can be selected on the
"INPUT SOURCE" menu.
Press
~.lT
to select the signal type you want
to set, and then press
ENTER.
•
If
the selected signal type
is
incorrect, images are
not displayed or displayed without any color.
Press
~.lT
to select "Input Select", and then
press
ENTER.
1/
Option
Press MENU to display the MENU screen, and
then press
.....
/~
to select "Option".
• Refer
to
your external equipment operation manual for the
signal type.
•
If
you set INPUT 1 or 3 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 3 signal selection
to
"Auto" when
other equipment
is
connected will result
in
the following
connection priority.
INPUT 1 or
3:
CD
COMPONENT VIDEO
® VIDEO
o
o
•
INPUT
MENU
POWER
MENU
•
FLASHBACK
o
Press INPUT again to select the input source.
•
An
image from the selected source automatically
displays.
• Each time
INPUT
is
pressed, the input source
toggles.
• You can also select the input source by pressing
./T.
•
If
the corresponding input
is
not plugged
in,
you
cannot change the input. Be sure
to
connect the
equipment beforehand.
Press INPUT.
• A list of selectable sources appears.
EXIT
~~_RETURN
a
VOL
CH
SURROUND
(+)
(JMUTE
aU
'/
a
• See pages 13
to
15 for external equipment connection.
@-
30
Using external equipment
To view external source images, select the input
source from
INPUT on the remote control unit or on
the
N.
If
the image does not come
in
clearly from the external
equipment connected to INPUT 1 or
3,
you may need
to change the input signal type setting on the "Input
Select" menu.
Press
MENU to exit.
• The setting
is
stored and can be selected on the
"INPUT SOURCE" menu.
Press
~.lT
to select the signal type you want
to set, and then press
ENTER.
•
If
the selected signal type
is
incorrect, images are
not displayed or displayed without any color.
Press
~.lT
to select "Input Select", and then
press
ENTER.
1/
Option
Press MENU to display the MENU screen, and
then press
.....
/~
to select "Option".
• Refer
to
your external equipment operation manual for the
signal type.
•
If
you set INPUT 1 or 3 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 3 signal selection
to
"Auto" when
other equipment
is
connected will result
in
the following
connection priority.
INPUT 1 or
3:
CD
COMPONENT VIDEO
® VIDEO
o
o
•
INPUT
MENU
POWER
MENU
•
FLASHBACK
o
Press INPUT again to select the input source.
•
An
image from the selected source automatically
displays.
• Each time
INPUT
is
pressed, the input source
toggles.
• You can also select the input source by pressing
./T.
•
If
the corresponding input
is
not plugged
in,
you
cannot change the input. Be sure
to
connect the
equipment beforehand.
Press INPUT.
• A list of selectable sources appears.
EXIT
~~_RETURN
a
VOL
CH
SURROUND
(+)
(JMUTE
aU
'/
a
• See pages 13
to
15 for external equipment connection.
@-
30
To Next Page
Loading...
