>>
<<
Watching TV
ENG 2-7
Initial Installation (Continue)
When "Set-top box" was selected in step 6.
Selecting "No" will complete the Easy Setup procedure.
This may not display correctly depending on the
connected equipment.
This is not displayed correctly when the connected
equipment is off.
To watch TV using a set-top box, press INPUT after
completing the initial settings, and select the input to
which the set-top box is connected.
NOTE
For changing the settings of the Initial Installation,
perform "Easy Setup" on the Initial Setup menu on
page 4-5.
To Next Page
Loading...
