16
Setup menu (Continued)
4:3 mode
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Selected item Description
Panorama
Wide image without side bars
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
WSS signal 4:3 screen
4:3 mode “Panorama” 4:3 mode “Normal”
Quick start
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Selected item Description
On
The TV quickly starts up from standby,
more of power consumption is required
during standby.
Off
Power consumption is less than 1W.
Text language
Select from among 3 kinds of language: West Europe,
Arabic, Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
Identification
You can check the current version of the software on the
screen.
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as Picture, Audio
and Programme will be reset to the factory preset values.
Option menu
Option
PC audio select
Auto volume
Digital audio output
Audio only
[HDMI1]
[On]
Output volume select
[Fixed]
[PCM]
Clear voice
[On]
Digital setup
Game play time
4
Colour system
4
Fine sync.
4
DivX(R) Reg. Code
Version up
PC audio select
When using the PC terminal or HDMI1 terminal, you
must select which terminal uses the AUDIO IN (R/L) jack
for analogue audio input.
Selected item Description
HDMI1
When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI
1 terminal and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
PC
When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
NOTE
• When connecting devices (including a PC) with digital audio
signal by using HDMI-certified cable to HDMI 1 terminal, you
must set to “PC”. If “HDMI1” is set, there will be no sound
output.
Output volume select
Allows you to select what controls the audio output.
Selected item Description
Fixed
• Sound via speakers is adjusted with
VOL k/l on the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.
Variable
• Sound via the AUDIO OUT terminal
is adjusted with VOL k/l on the
remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• During “Output volume select” is set to “Variable”, all Audio
menu item cannot be adjusted.
Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from movie
to the advertisements. Auto volume solves this problem
and equalises the volume levels. (On, Off)
Clear voice
This function emphasises speech against background
noise for greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is “On”.
LC_60LE631X_EN.indd 16LC_60LE631X_EN.indd 16 11/5/2012 10:57:09 AM11/5/2012 10:57:09 AM
To Next Page
Loading...
