On=Screen Display Menu
You can adjust the sound quality to your preference
with the following settings.
Example
AQUOS 1
NET APF'S
A B C D
0000
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "Audio Settings".
2 Press A/V to select a specific adjustment item.
o Select "Auto Volume", "Surround", "Bass Enhancer" or
"Clear Voice", and then press ENTER to set each item.
3 Press A/T (or 4t/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio Decrease audio
from the right from the left
speaker speaker
= Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 32.)
= For resetting Audio adjustment items to the factory preset
values, press A/T to select "Reset", press ENTER, press
h,/T to select "Yes", and then press ENTER.
Different sound sources sometimes do not have the
same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Nigh: Reducingthe loudnessgaps among different
sound sourcesstrongly.
Middle:
Low: Reducingthe loudnessgaps among different
sound sourcesslightly.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
The surround function produces Surround effect from
the speakers.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
= For some discs, setup may be required on your BD/DVD
player. In this case, please refer to the operation manual of
your BD/DVD player.
This function allows you to enjoy bass-enhanced sound.
On. Bass Enhancer function is on.
Off: Normal sound.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
This function emphasizes speech against background
noise for greater clarity.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
Q- 29
To Next Page
Loading...
