Sharp Aquos LC-80UE30U

EJ Devices Operation EJ
HDMI T ype Selection lul l
Audio Select HDMI(D1g .
ENG 4-2
Video In (Continue)
Audio Select
This function sets the terminal to output the
computer aud io.
The adjustment items vary depending on
the i nput source . Select the input sou r ce
correspond i ng to the terminal connected to
the PC and then adjust the desired i tem.
To perform the operation , refer to "Devices"
> "
Video in"> "HDMI3 " >"Audio Select" .
HDMI3
HDMI(Digital): Select this when the TV and
PC are connected using an HDMI-
certified cable and audio is input via the
same cable.
HDMI•Analog : Select this when the TV and
PC are connected using a HDMI-certified
cable and the audio is input via a 0 3.5
mm stereo minijack .
•
When · Audio Select" is set to
"HDMI•Analog ", sound will not be
produced if you use only an HDMI-
certified cable to connect HDMI-
compatible equipment. To produce
sound, you should make an ana l og audio
connection .
•
If you want to connect HDMI-compat i ble
equipment using only an HDMI-certified
cable . set "Audio Select" to
"HDMI<DigitaD".
• "
Audio Select" can only be set for the
HDMIIN 3.
ENGLISH I FRAN<;AIS I ESPANOL