Sharp Aquos LC-80UE30U

EJ Using a PC EJ
Setting Audio Input
Audio Select HDMI
This function sets the terminal to output the computer audio .
The adjustment items vary depending on the input source . Select the
input source corresponding to the terminal connected to the PC and
then adjust the desired item .
To perform the operation , refer to " Devices"> " Video in " > "HDMI3 " >
"Audio Select ".
HDMI3
HDMI(Digital): Select this when the TV and PC are connected using an
HDMI-certified cable and audio is input via the same cable .
HDMI•Analog:
Select this when the TV and PC are connected using a
HDMI-certified cable and the audio is input via a 0 3.5 mm stereo
minijack .
•
When "Audio Select" is set to "HDMI•Analog ", sound will not be
produced if you use only an HDMI-certified cable to connect HDMI-
compatible equipment. To produce sound , you should make an
analog audio connection .
•
If you want to connect HDMI-compatible equipment using only an
HDMI-certified cable , set " Audio Select" to "HDMI(Digital)".
• "
Audio Select" can only be set for the HDMIIN 3.
ENG 8-1
ENGLISH I FRAN<;A IS I ESPANOL