Sharp Aquos LC-80UE30U

EJ Direct Button Operation EJ
Changing Channels
You can change channels in several ways .
Method 1
Using CH 1\ / V on the remote control unit
or on the TV .
Method 2
Using remote control buttons o-g , • (DOT).
Examples :
To select a 1 or 2-digit channel number (e.
g. , Channels> :
Presss~ ENT
To select a 3-digit channel number (e. g. ,
Channel 115):
Press1~1~5~ ENT
To select a 4-digit channel number (e . g.,
Channel 22.1):
Press 2
~ 2 ~ • (DOT) ~ 1 ~ ENT
•
When selecting a 1-digit channel
number , it is not necessary to press o
before the number .
•
When you enter o-g only , channel
select i on will be made if there is no
operation within a few seconds.
•
If you push "o" by itse lf, nothing will
happen.
• Complete the above steps within a few
seconds .
•
When you enter o-g and • (DOT). channel
select i on will be made if there is no
operation within a few seconds.