Sharp Aquos LC-80UE30U

Control of the TV (Continue)
Command format
Eight ASCII codes +CR
C1 C2 C3 C4 P1 P2 P3 P4
Command4digits Parameter4digits Returncode
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0-9, x, blank, ?
Parameter
Input the parameter values, aligning left, and fill with blank(s) for the
remainder. (Be sure that 4 values are input for the parameter.)
When the input parameter is not within an adjustable range, "ERR"
returns. (Refer to "Response code format".)
Any numerical value can replace the "x" on the table.
3 0
0 0 0 9
0
? ? ? ?
?
When"?"isinputforsome
commands,the
presentsetting
valueresponds.
Response code format
Normal response
O K
Returncode(0DH)
Problem response
(communication error or incorrect command)
Returncode(0DH)
E R R
Command table
Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
POWER SETTING P O W R 0 _ _ _ Power Off It shifts to
standby.
1 _ _ _ Power On Power On
INPUT
SELECTION
TOGGLE I T G D x _ _ _ (Toggle) It input-
switches by
the toggle.
(It is the
same as an
input
change key)
TV I T V D 0 _ _ _ It input-
switches to
TV. (A
channel
remains as
it is. (Last
memory))
1-5 I A V D * _ _ _ 1: HDMI IN 1,
2: HDMI IN 2,
3: HDMI IN 3,
4: HDMI IN 4,
5: COMPONENT/
VIDEO IN
NOTE
If an underbar (_) appears in the parameter column, enter a space.
If an asterisk (*) appears, enter a value in the range indicated in
brackets under CONTROL CONTENTS.
Any numerical value can replace the "x" on the table.
Using a PC
ENG83
ENGLISH | FRANÇAIS | ESPAÑOL
>><<