Using "Osaifu-Keitai compatible services"
z
To use Osaifu-Keitai compatible services, make the
settings of the Osaifu-Keitai compatible app.
1
z
z
If the initial settings are not completed, the initial
settings screen appears. Follow the instructions on
the screen and operate.
2
z
Make settings of the app service.
3
b
mark
Using "Kazashite-Link compatible
services"
z
Enable [Reader/Writer, P2P] in advance (
☞
P. 129"NFC settings").
1
b
Precautions about holding over the other
device
z
Pay attention to the following points when holding the
a mark over the other device such as a scanning
device or device into which an NFC module is built.
Do not let the handset strongly clashed with the
other device but slowly bring the handset close to
the other device when holding the
b
mark over it.
Hold the
b
mark over the center of the other device
and in parallel with it. If the other device does not
recognize the built-in IC card even when you do so,
slightly move the handset away from the other
device or move the handset around.
The other device may not recognize the built-in IC
card if there are metallic objects between the
b
mark and the other device. Remove the handset from
its cover or case if the other device does not
recognize the built-in IC card, since equipping the
handset with it may influence the communication
performance.
128
Tools/Apps
To Next Page
Loading...
